E-flite Super Cub 25e ARF User Manual download pdf (Page 14)

14 E-flite Super Cub 25e ARF Assembly Manual

 5. Place the speed control in the fuselage. Use two-

sided tape to secure the speed control in the fuselage

so it rests against the landing gear mount.

 6. Connect a 9-inch (228mm) servo extension to the

speed control lead. Use a string or piece of dental

floss to secure the lead so it does not accidentally

disconnect inside the fuselage.

 7. Mount the switch in the fuselage using the

hardware provided with the speed control.

 8. Guide the extension along the bottom inside the

fuselage. Run the extension back as far as it will

go. Use low-tack tape to prevent the extension from

falling forward in the fuselage until it is plugged

into the mounted receiver.

Cowling, Propeller and

Flight Battery Installation

Required Parts

Fuselage assembly Cowl

Propeller Spinner assembly (not included)

Motor battery Hook and loop strap

Hook and loop tape

Required Tools and Adhesives

Box wrench: 10mm

Hex wrench: 3/32-inch

 1. Slide the cowling on the fuselage. The dowels in

the fuselage will position the cowl and the magnets

will hold the cowl to the fuselage.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

No comments

E-flite Super Cub 25e ARF User Manual Page 14