E-flite Beechcraft Staggerwing 480 ARF User Manual download pdf (Page 21)

21E-flite Beechcraft 480 Staggerwing 480 ARF Assembly Manual

 2. Install the air tank in the fuselage. Use a very

small amount of silicone adhesive to keep the air

tank from moving in the fuselage. Don’t over-glue

the air tank in case it requires removal in the future.

Final Assembly

Required Parts

Fuselage assembly Top and bottom wing

Antenna (2) Interplane strut (2)

3mm x 25mm shoulder machine screw (4)

2mm x 7mm self-tapping washer-head screw (4)

Required Tools and Adhesives

Medium CA Hobby knife with #11 blade

Phillips screwdriver: #1

 1. Locate the hole for the screw mount underneath

the decal and use a hobby knife and #11 blade

to remove the decal, exposing the location for the

interplane strut screws.

 2. Position the bottom wing on the fuselage. Guide

the flap servo lead (and retract servo lead) through

to the receiver in the fuselage. Screw the quick

disconnect valve together tightly. If it is not screwed

together tightly, air will leak and the system will not

hold pressure.

 If you have installed retracts, make

sure to connect the air lines from the

wing and air tank, and the retract

servo lead at this time as well.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

No comments

E-flite Beechcraft Staggerwing 480 ARF User Manual Page 21