E-flite Beechcraft Staggerwing 480 ARF User Manual download pdf (Page 20)

20 E-flite Beechcraft Staggerwing 480 ARF Assembly Manual

Receiver and Motor Battery Installation

Required Parts

Fuselage assembly Receiver

Motor battery Two-sided tape

Hook and loop tape (not included)

6-inch (152mm) servo extension

 1. Route the 6-inch (152mm) servo extension

from the top of the fuselage through to the battery

compartment of the fuselage.

 2. Place a piece of two-sided tape on the bottom of

the receiver.

 3. Connect the leads from the ESC, elevator servo,

rudder servo, and the 6-inch (152mm) aileron servo

extension to the appropriate ports of the receiver.

Secure the receiver in the fuselage using the two-

sided tape.

 4. The motor battery will slide into the opening at

the front of the fuselage. Use hook and loop tape

on the battery and fuselage to keep it secure in

the fuselage.

Retract Air Tank

Installation (Optional)

Required Parts

Fuselage assembly Air tank

Air line Quick disconnect

Required Tools and Adhesives

Hobby knife with #11 blade

Silicone adhesive

 1. Use a hobby knife with a #11 blade to trim a

2-inch (52mm) piece of red airline. Connect the

airline to the air tank. Connect the quick disconnect to

the opposite end of the air line.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

No comments

E-flite Beechcraft Staggerwing 480 ARF User Manual Page 20