E-flite Fury 15 DF BNF Basic Instruction Manual download pdf (Page 4)

Model Assembly

Wing Installation

1. Guide the aileron servo connectors (A) through the hole located to the side

of fan unit.

2. Slide the two guide pins (B) of the wing into the two holes in the fuselage.

CAUTION: DO NOT crush or otherwise damage wiring when attaching the

wing to the fuselage.

3. Align and attach the wing to the fuselage using a screw (C).

Tip: Carefully support the aircraft while installing or removing screws.

4. Carefully lift the front of the canopy (D) and pull the canopy forward and off

the fuselage.

5. Connect both aileron servo connectors (E) to the aileron Y-harness. The left

and right servo connectors do not have to be connected to a particular side

of the Y-harness.

IMPORTANT: Correct operation of the AS3X system requires connection of both

ailerons to the included Y-harness and the AILE channel of the receiver.

When needed, disassemble in reverse order.

FPO

4 X 12mm

1 2 3 4 5 6 7 8 9 ... 17 18

No comments

E-flite Fury 15 DF BNF Basic Instruction Manual Page 4