E-flite Park 180 Brushless Outrunner Motor, 2200Kv User Manual download pdf

Park 180 Brushless Outrunner Instructions

Thank you for purchasing the E-flite Park 180 Brushless Outrunner motor. This motor is ideal for 3D models 2-3 oz (55-85g), and sport

and scale models 3-6 oz (85-170g) or models requiring up to 30 watts of power.

Park 180 Brushless Outrunner Features:

• Ideal for 3D models 2-3 oz (55-85g) and sport and scale models 3-6 oz (85-170g)

• Ideal for up to 30 watts

• Designed for firewall mount or carbon tube mount

• Includes mount, mounting hardware, and 2mm gold BL connectors

• Extremely quiet and lightweight - just .3 ounces (8.5 grams)

• Upgraded performance motor for indoor motors

• High quality construction with ball bearings and hardened steel shaft

• Slotted 12-pole outrunner design

Park 180 Specifications

Diameter: 16mm (.63 in)

Case Length: 20mm (.80 in)

Weight: 8.5 g (.30 oz)

Shaft Diameter: 1.5mm (.06 in)

EFLM1120

Kv: 2200 (rpms per volt)

Io: .30A @ 8V (no load current)

Ri: .91 ohms (resistance)

Continuous Current: 2.6A*

Max Burst Current: 3.2A*

Input Watts: 30

Cells: 2-3S Li-Po or 4-8 Ni-MH/Ni-Cd

Recommended Props: 3x3 to 6x3 ‘Slow Flyer’ for 2S or 4x4 to 4.5x3 for 3S

Brushless ESC: 4A – 6A

* Maximum Operating Temperature: 220 degrees Fahrenheit

* Adequate cooling is required for all motor operation at maximum current levels.

* Maximum Burst Current duration is 15 seconds. Adequate time between maximum burst intervals is required for proper cooling and

to avoid overheating the motor.

* Maximum Burst Current rating is for 3D and limited motor run flights. Lack of proper throttle management may result in damage to

the motor since excessive use of burst current may overheat the motor.

Battery Choices:

We recommend either E-flite or Thunder Power batteries and list some possible choices for the Park 180 Brushless Outrunner motor,

all depending on the airplane application. Battery technology is constantly changing and manufacturers are improving and updating

their packs. The list below may change as new batteries are introduced.

THP2502SJPL2 250mAh 2-Cell/2S 7.4V 20C Pro Lite V2 Li-Po JST

THP2503SJPL2 250mAh 3-Cell/3S 11.1V 20C Pro Lite V2 Li-Po JST

THP3502SJPL2 350mAh 2-Cell/2S 7.4V 20C Pro Lite V2 Li-Po, JST

THP3503SJPL2 350mAh 3-Cell/3S 11.1V 20C Pro Lite V2 Li-Po, JST

THP4802SJPL2 480mAh 2-Cell/2S 7.4V 20C Pro Lite V2 Li-Po, JST

THP4803SJPL2 480mAh 3-Cell/3S 11.1V 20C Pro Lite V2 Li-Po, JST

EFLB4302SJ 430mAh 2S 7.4V 20C LiPo, 20 AWG JST

EFLB4303SJ 430mAh 3S 11.1V 20C LiPo, 20 AWG JST

Examples of Airplane Setups:

Semi-Scale Aerobatic Biplane

Weight w/Battery: 4.2 oz

Prop 6 x 3 Slow Flyer

Battery: 480mAh 2-Cell 7.4V Li-Po (THP4802SJPL2)

ESC: 4A-5A Brushless

Comments – Great aerobatic performance with plenty of flight time.

1 2 3 4

Summary of Contents

Page 1

Park 180 Brushless Outrunner Instructions Thank you for purchasing the E-flite Park 180 Brushless Outrunner motor. This motor is ideal for 3D model

Page 2

Flat Foamy Profile Jet Weight w/Battery: 2.0 oz Prop: 3 x 4 Slow Flyer Battery: 250mAh 2-Cell 7.4V Li-Po ESC: 10A Brushless Comments – Extreme spe

Page 3

NOTE: Photo shows installation using a carbon fiber tube, with 7mm OD, 5mm ID (EFLM1963 available separately). This is an option for mounting t

Page 4

Questions, Assistance, and Repairs: Your local hobby store and/or place of purchase cannot provide warranty support or repair. Once assembly, setup or

Comments to this Manuals

No comments

E-flite Park 180 Brushless Outrunner Motor, 2200Kv User Manual

Browse online or download User Manual for Hardware E-flite Park 180 Brushless Outrunner Motor, 2200Kv. E-flite Park 180 Brushless Outrunner Motor, 2200Kv User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware E-flite Park 180 Brushless Outrunner Motor, 2200Kv