E-flite Beechcraft Bonanza 15e ARF User Manual download pdf (Page 14)

Beechcraft Bonanza 15e ARF Assembly Manual

Optional V-Tail Installation

Parts Required

Fuselage V-tail

#4 steel washer (2) Tailcone

4-40 x 3/4-inch Allen head machine screw (2)

#2 x 1/4-inch woodscrews (3)

Tools Required

Threadlock 3/32-inch hex wrench

Low-tack tape #1 Phillips screwdriver

Hobby knife with #11 blade

□ Step 1

Use a hobby knife to remove the covering over the

two guide tubes for the tail retention bolts in the

lower rear fuselage.

□ Step 2

Place a #4 steel washer on each of the 4-40 x

3/4-inch Allen head tail retention screws.

□ Step 3

Invert the fuselage and place a bolt into the rear

mounting hole.

□ Step 4

Engage a 3/32-inch hex wrench in the screw head.

Use the wrench to hold the screw in place while the

fuselage is turned over to install the tail.

□ Step 5

Apply a small amount of threadlock to the end of the

exposed screw.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

No comments

E-flite Beechcraft Bonanza 15e ARF User Manual Page 14