E-flite Beechcraft Bonanza 15e ARF User Manual download pdf (Page 10)

Beechcraft Bonanza 15e ARF Assembly Manual

□ Step 8

Set the n and rudder in place on the horizontal

stabilizer. The dowel in the dorsal n locates in the

hole in the top of the fuselage.

□ Step 9

Align the screw with the blind nut in the base of the

n and use the 3/32-inch hex wrench to secure the

n and stabilizer to the fuselage.

□ Step 10

Turn the fuselage over. Place a small amount of

threadlock on the second screw and insert it into the

forward mounting hole. Use a 3/32-inch hex wrench

to tighten it into place.

□ Step 11

Center the elevators and rudder. With the rudder and

elevator servos centered, adjust the clevises to align

them with the control horns. Connect the elevator

pushrod to the outer hole in the control horn, and

connect the rudder pushrod to the adjustable horn.

Secure the clevises with the silicone keepers.

□ Step 12

Use a #1 Phillips screwdriver to install the tailcone

with three #2 x 1/4-inch woodscrews.

Use low-tack tape to center the control

surfaces while setting up servos and

pushrod lengths.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

No comments

E-flite Beechcraft Bonanza 15e ARF User Manual Page 10