E-flite T-34 Mentor 25 ePTS RTF manual User Manual download pdf (Page 7)

7E-flite T-34 Mentor ARF Assembly Manual

Wing and Landing Gear Assembly

Required Parts

Wing panel (left and right) Landing gear strap (5)

Flap linkage (fixed flap) Wing tube

Aluminum anti-rotation pin

3mm x 10mm sheet metal screw (10)

Required Tools and Adhesives

Medium CA Phillips screwdriver: #2

 1. Attach the flap linkage to the flap linkage stay. The

linkage will attach to the third hole.

Note: The flap will be set to the training position in this

section. Setting the flap position for your particular level

of flight skills will be covered later in the manual.

Hint: You can skip steps 1 and 2 if you plan on installing

a servo for the operational flaps. Follow the steps in the

section "Operational Flap Installation (Optional)" instead.

 2. Connect the clevis to the flap control horn. You will

note the flap is driven down when you connect the clevis.

We will adjust this position in a few steps.

 3. Slice the aluminum anti-rotation pin into the wing. It is

suggested to use medium CA to glue the pin in place to

prevent it from falling out and getting lost.

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

No comments

E-flite T-34 Mentor 25 ePTS RTF manual User Manual Page 7