E-flite Rhapsody 25e ARF User Manual download pdf (Page 4)

4 E-flite Rhapsody 25e ARF Assembly Manual

Warnings

Read and follow all instructions and safety precautions

before use. Improper use can result in fire, serious

injury and damage to property.

COMPONENTS

Use only with compatible components. Should any

compatibility questions exist please refer to the product

instructions, the component instructions or contact

Horizon Hobby, Inc.

FLIGHT

Fly only in open areas to ensure safety. It is

recommended flying be done at AMA (Academy of

Model Aeronautics) approved flying sites. Consult local

laws and ordinances before choosing a location to fly

your aircraft.

PROPELLER

Keep loose items that can get entangled in the

propeller away from the prop, including loose clothing,

or other objects such as pencils and screwdrivers.

Especially keep your hands away from the propeller as

injury can occur.

BATTERIES

Notes on Lithium Polymer Batteries

When misused, lithium polymer batteries are

significantly more volatile than alkaline or Ni-Cd/

Ni-MH batteries used in RC applications. Always

follow the manufacturer’s instructions when using

and disposing of any batteries. Mishandling of Li-Po

batteries can result in fire and explosion causing

serious injury and damage.

SMALL PARTS

This kit includes small parts and should not be left

unattended near children as choking and serious injury

could result.

SAFETY PRECAUTIONS

This is a sophisticated hobby Product and not a toy.

It must be operated with caution and common sense

and requires some basic mechanical ability. Failure to

operate this Product in a safe and responsible manner

could result in injury or damage to the Product or

other property. This Product is not intended for use by

children without direct adult supervision. The Product

manual contains instructions for safety, operation and

maintenance. It is essential to read and follow all

the instructions and warnings in the manual, prior to

assembly, setup or use, in order to operate correctly

and avoid damage or injury.

During the course of building your Rhapsody 25e we

suggest you use a soft base for the building surface.

Such things as a foam stand, large piece of bedding

foam or a thick bath towel will work well and help

protect the model from damage during assembly.

Rudder and Stabilizer Installation

Required Parts

Stabilizer assembly Fuselage assembly

Fin assembly 4-40 locknut (2)

#4 washer (4)

4-40 x 1/2-inch machine screw (2)

Required Tools and Adhesives

Threadlock Nut driver: 1/4-inch

Thin CA Phillips screwdriver: #1

Make sure to use threadlock on all metal-to-

metal fasteners so they don’t vibrate loose.

 1. Locate the stabilizer and fin assemblies. Insert

the threaded rods on the bottom of the fin into the

holes in the stabilizer. Note the trim scheme of the

stabilizer in the photos.

1 2 3 4 5 6 7 8 9 ... 23 24

Comments to this Manuals

No comments

E-flite Rhapsody 25e ARF User Manual Page 4

Comments to this Manuals

Related products and manuals for Air equipment E-flite Rhapsody 25e ARF