E-flite 30-Amp Mini Brushed ESC with Brake User Manual download pdf

Thank you for choosing the E-flite

™

brand. Your

satisfaction is our number one priority. With this in

mind, we have produced this product to be of the

highest quality, performance, and reliability at a

“value-packed” price. We hope it provides you with

hours of enjoyment.

• Thermal overload/current protection

(prevent ESC burnout if overloaded or shorted)

• Auto-cutoff shuts off power to the motor while

still supplying power to operate the radio

• 30-amp continuous current

• Input Voltage Range: 5-cell, 6-volt to 10-cell, 12-volt

• BEC Voltage: 3.3 volts DC, 1 amp

• Prewired with Tamiya battery connector and

bullet-style motor connector

• Universal receiver plug

• On/Off switch

Operation: Proportional forward

power with brake, auto-

cutoff

Input Voltage: 5-cell (6 volts) through

10-cell (12 volts)

Continuous Current: 30 amps

Size:

(1.37" x .71" x .34")

34.8mm x 18mm x 8.6mm

Weight: .86 ounces (24.3g)

A universal receiver connector is prewired to the

controller (see diagram). Insert the receiver

connector into the throttle channel of the receiver.

This connector is compatible with JR, Futaba and

Hi-Tec receivers. Other types of receivers may not be

compatible. Be sure to route the receiver connector

wire neatly.

The E-flite Speed Controller will handle continuous

current up to 30 amps. This typically includes up to

Speed 600 motors. Female bullet-style connectors

are provided for convenient hook up with motors

that are prewired. The red wire is positive (+) and

the black wire is negative (-).

The E-flite 30-Amp Speed Control comes prewired

with a Tamiya-style battery connector that is

compatible with connectors found on most battery

packs. You can use a 5-cell to 10-cell battery pack

(6- to 12-volt).

Using double-sided servo tape, mount the E-flite

30-Amp Speed Controller in the position shown in

the instruction manual for your particular model. Be

sure to mount the control so that the motor, battery,

and receiver wires reach. Mount the switch using a

screw and switchplate kit or use double-sided servo

tape on the side of the switch to mount it to the

fuselage of your model.

1. Be sure the On/Off switch is in the off position

and the motor is not yet connected.

2. Plug the speed control throttle lead into the

throttle servo receptacle on the receiver.

3. Turn on the transmitter and place the throttle

control stick in the center position. If you have

a computer transmitter, adjust the throttle ATV

to 100%.

4. Connect a fully charged battery to the battery

connector on the speed control. Note the

positive and negative leads. Ensure proper

polarity when making the connection, because

incorrect polarity will damage the speed control.

5. If you used a PCM transmitter, set the fail-safe

memory on low speed.

6. Turn off all switches before connecting the

motor. After connecting the motor, turn the

switches on. The throttle will start from

low speed.

7. Test the motor.

Note: If your electronic speed control fails to

operate after following the above steps,

unplug the receiver connector and rotate 180˚.

To receive warranty service, your original dated sales

receipt must be included to verify your proof-of-

purchase date. Providing warranty conditions have

been met, your electronic speed control will be

repaired or replaced free of charge.

Should your repair cost exceed 50% of the retail

purchase price, you will be provided with an

estimate advising you of your options. Any return

freight for non-warranty repairs will be billed to

the customer.

For non-warranty repairs, please advise the

payment option you prefer to use. Specify VISA,

Mastercard or money order. If you choose to use

a credit card please include your card number and

expiration date.

E-flite 30-Amp 120-Day Limited Warranty

E-flite warranties this product to be free from

defects in materials and workmanship for a period

of 120 days from the original date of purchase.

This warranty is limited to the original purchaser of

this electronic speed control and is not

transferable. It will not cover units that have been

modified, misused, or serviced by an unauthorized

service center.

Your warranty may be voided if damage

results from:

1. Reverse voltage is applied to your E-flite

30-Amp Speed Control (e.g., connecting

battery pack backward, plugging battery into

the motor connector wires, etc)

2. The battery plugs or connectors are altered or

removed

3. You allow your wires to become frayed or shorted

4. Use of less than 5-cell (6 volts) or more than a

10-cell (12 volts) battery pack

5. Tampering with any of the electronic components

6. Allowing water, moisture, or foreign material

(e.g. dirt, dust, etc.) into the electronic speed

control unit

Under no circumstances will the buyer be entitled to

consequential or incidental damages. This limited

warranty gives you specific legal rights; you also

have other rights that may vary from state to state.

If your electronic speed control is in need of repair,

please ship it freight prepaid to:

Horizon Service Center

ATTN: E-flite Service

4105 Fieldstone Road

Champaign, Illinois 61822

(217) 355-9511

Include your complete name and address

information inside the carton, as well as write it

clearly on the return address label area. Include a

brief summary of the difficulty. Date your

correspondence and be sure your name and address

appear on this enclosure. Also, include a phone

number where you can be reached during the

business day.

Features

Diagram

Mounting the Controller

Hooking Up the Motor

Warranty Repairs

Non-Warranty Repairs

Warranty InformationPreflight Instructions

Specifications

EFLA106

30-Amp

Mini ESC

with Brake

EFLA106

Instruction Manual

Connect to

Throttle

Channel

Power Switch

Motor

Ni-Cd Battery Pack

BEC Connector

Receiver

Hooking Up the Receiver

Hooking Up the Speed Control

™

4105 Fieldstone Rd., Champaign IL., 61822

www.horizonhobby.com

Mini ESC 1

Summary of Contents

Page 1 - Mini ESC

Thank you for choosing the E-flite™brand. Yoursatisfaction is our number one priority. With this inmind, we have produced this product to be of thehig

Comments to this Manuals

No comments

E-flite 30-Amp Mini Brushed ESC with Brake User Manual

Browse online or download User Manual for Hardware E-flite 30-Amp Mini Brushed ESC with Brake. E-flite 30-Amp Mini Brushed ESC with Brake User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware E-flite 30-Amp Mini Brushed ESC with Brake