E-flite UMX ASK-21 BNF User Manual download pdf (Page 6)

6

EN

Wing Installation

1. Lift the front of the canopy (A) and pull it

forward off the fuselage.

2. Align the 4 holes in the wing (B) with the 4

screw posts in the fuselage.

3. Secure the wing to the fuselage by fully

tightening the 4 included screws (C).

4. Connect the aileron leads to the aileron

ports on the receiver. Left aileron servo needs

to be connected to the front port (D), right

aileron servo needs connected to the rear port

(E). The servos leads are labeled “L” and “R”

for your convenience.

5. Be sure to check proper control directions

before your first flight. You should not need to

reverse any control surfaces.

6. Reinstall the canopy on

the fuselage.

Disassemble in reverse order.

A

C

B

E

Top View

D

1 2 3 4 5 6 7 8 9 10 11 ... 20 21

Comments to this Manuals

No comments