E-flite Stearman PT-17 15e ARF User Manual download pdf (Page 11)

Landing Gear Installation

Parts Required

Landing gear (left and right)

Fuselage assembly

6-32 x 3/8-inch Allen bolts (4)

#6 washers (4)

Tools Required

7/64-inch balldriver or Allen wrench

Threadlock

ΟΟ 1. With the fuselage inverted, insert the landing

gear into the fuselage until the mounting holes

align with the holes in the fuselage.

ΟΟ 2. Using a 7/64-inch balldriver, secure the

landing gear with two 6-32 x 3/8-inch Allen

bolts and #6 washers. Use threadlock on the

bolts to prevent them from vibrating loose.

Ο 3. Repeat steps 1 and 2 for the opposite side.

Cabane Strut and Center Section Installation

Parts Required

Cabane struts (4) Fuselage assembly

Wing center section #4 steel washers (4)

4-40 x 1/4-inch Allen bolts (8)

4-40 x 3/8-inch Allen bolts (4)

Tools Required

3/32-inch balldriver or Allen wrench

Threadlock

Ο 1. Use a 3/32-inch balldriver to install each of the

four cabane struts to the fuselage with 4-40 x

1/4-inch Allen bolts. Apply a small amount of

threadlock to each bolt to prevent them from

vibrating loose.

Note:

All cabane struts are the same.

E-flite Stearman PT-17 15e ARF Assembly Manual

1111

Use threadlock on all metal-to-metal fasteners to

keep them from vibrating loose.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

No comments

E-flite Stearman PT-17 15e ARF User Manual Page 11